LI0201E800R-10【PDF 6/6 页】1 FUNCTIONS, 0.5 A, FERRITE CHIP

global solutions: local support

Innovative Technology

for a Connected World

LI0201

Ferrite Chip Beads

Application Notes

USA: +1 800 634.2673

+1 423 308.1690

Europe: +49 8031.2460.0

Asia: +86 755.2714.1166

www.lairdtech.com

MOISTURE SENSITIVITY

Laird Technologies’ surface mount components are not moisture sensitive as defined in IPC / JEDC J-STD-020C, as they are hermetic

devices. All surface mount components are packaged in tape & reel. Each reel is single packed in a sealed bag with sufficient desiccant

to prevent oxidation of part terminations and maintain shelf life.

SHELF LIFE

Cofire Monolithic Products are allowed twelve (12) months from date of shipment for product stored in unopened, original packaging.

Once the original packaging is opened the shelf life is reduced to three months (or the remainder of the 12 months if opened after 9

months).*

Assembled Products with wire are allowed twenty-four (24) months from date of shipment for product stored in unopened, original

packaging. Once the original packaging is opened the shelf life is reduced to six Months (or the remainder of the 24 months if opened

after 18 months).*

*Note: Board Level Cofire (monolithic) and Assembled products with wire must be stored in a non-corrosive,

temperature and humidity controlled environment. The temperature should be between –5°C and +40°C, and the

humidity between 40 and 60% RH, with no sudden changes.

Ferrite Cores for cables and wiring harnesses have an unlimited shelf life. All cores are RoHS compliant.

Ferrite Disks & Plates with adhesive have twenty-four (24) months shelf life on the adhesive from date of certificate of analysis.

Ferrite Disks & Plates will be labeled at the manufacturing site to indicate expiration date of the adhesive on the disk or plate. Ferrite

Disks & Plates are RoHS compliant.

OPERATING TEMPERATURE FOR BOARD LEVEL SHIELDS

All board level part electrical specifications and tolerances are based on room temperature (23°C ± 2°C). Laird Technologies’ board level parts

have an operating temperature of -40C to +125C (unless stated otherwise). While the parts will continue to operate and not be damaged

over this range, they may not operate within the specified electrical performance tolerances during exposure to extreme temperatures.

NOTE : All Laird Technologies’ Ferrite EMI cable cores are RoHS compliant

发布紧急采购，3分钟左右您将得到回复。

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购